Safety Precautions - Olympus DP2-SAL Instructions Manual

Standalone connection kit
Table of Contents

Advertisement

Safety precautions

If the product is used in a manner not specified by this manual, the safety of the user may be imperiled. In addition, the
product may also be damaged. Always use the equipment according to this instruction manual.
The following symbols are used in this instruction manual.
CAUTION
CAUTION - Electric safety -
Always use the AC adapter and the power cord provided by Olympus.
If the proper AC adapter and the power cord are not used, the electric safety and the EMC (Electro-Magnetic
Compatibility) performance of the device cannot be assured.
Always connect the ground terminal.
Connect the ground terminal of the power cord and that of the power outlet. If the device is not grounded, our
intended electric safety and EMC performance of the device can not be assured.
Do not use the device in close proximity of the sources of strong electromagnetic radiation.
Proper operation may be interfered. The electromagnetic environment should be evaluated prior to operation of this
device.
Remove the power cord in case of emergency.
In case of emergency, be sure to unplug the power cord from the power cord connector on the product or from the
wall power outlet. Install the product at the location where you can reach the power cord connector or the wall power
outlet at hand to remove the power cord quickly.
Be sure to turn OFF the power of the device before connecting /disconnecting cables and units.
Insert the cables completely to the end of the connector.
Before pressing the main switch, be sure to make sure that the cable which connects the control box D2-CB and
each unit is inserted completely to the end of the connector.
CAUTION - Protection for electric shock -
Do not insert any tools or metal fragments in the air vents of the device.
Doing so could cause electric shock or failure of the product.
Keep the power cord and cables well away from devices generating heat.
If the power cord and cables contact a hot area, they could melt and cause electric shock.
2
: Indicates a potentially hazardous situation which, if not avoided, may result in
minor or moderate injury.
: Indicates a potentially hazardous situation which, if not avoided, may result in
CAUTION
damage to the equipment or other property.
} : Indicates commentary (for ease of operation and maintenance).

Advertisement

Table of Contents
loading

Table of Contents