Basic Settings; Setting Live Image Resolution - Olympus DP2-SAL Instructions Manual

4-2 Basic settings

This section describes the settings related to acquisition.
a
b
c
1

Setting live image resolution

1
Select the [Menu] tab a and select the [Resolution] tab b in the
tab displayed.
2
Press the button of [Live image resolution] c to select resolutions
described below in the list.
High resolution 1920 x 1440
Low resolution
Binning
Full HD
High resolution:
The high definition image observation and acquisition are
available. This is suitable for displaying clear images on the
large display.
Low resolution:
The image size can be smaller than the high resolution.
When using DP27, the frame rate can be higher than the high
resolution. The smooth live image can be displayed even
though the observation objects are moving in the tests, etc.
Binning:
The sensitivity is higher comparing to other modes. This is
suitable for observing the dark image at high frame rate.
Full HD:
The images can be observed and acquired in full high-vision
size. This is suitable for observing with the full high-vision
display.
} If the resolution specified is different from the resolution of the
display, the live image is zoomed in or zoomed out according to the
display size. When the image is zoomed in, the noise in the image
is also zoomed in. Therefore, the noise may be noticeable.
} The live image is zoomed in according to the resolution of the
display, but the aspect ratio may not be optimum. To display the
image in the optimum aspect ratio, set the display resolution
appropriately. For setting the display resolution, refer to (P.83).
DP22
2448 x 1920
Frame rate: 25 fps Frame rate: 15 fps
960 x 720 1224 x 960
Frame rate: 25 fps Frame rate: 30 fps
960 x 720 Binning 1224 x 960 Binning
Frame rate: 25 fps Frame rate: 30 fps
1920 x 1080 1920 x 1080
Frame rate: 30 fps Frame rate: 22 fps
DP2-SAL
DP27
29