Table of Contents
Advertisement
a
c
d
e
a
c
78
1
Setting the language
b
You can set the language you use. The language can be selected
from 2 languages: Japanese or English.
1
Select the [Menu] tab a and select the [Setting] tab b in the tab
displayed.
2
Use the [Language] c button to select.
3
The message shown on the left appears. Confirm the content and
press the [OK] button d .
CAUTION
4
If the recording media such as a USB memory, etc. are connected
to the control box D2-CB, the message shown on the left appears.
Disconnect the recording media and press the [OK] button e .
CAUTION
2
Setting the microscope
b
You can set the adapter lens magnification, the objective magnification
and the zoom/magnification changer which are required for displaying
the scale in an appropriate length.
} When the control box (U-CBS, etc.) is connected, the setting
procedures will be different. Refer to "Automatic scale change (P. 92)".
1
Select the [Menu] tab a and select the [Maintenance] tab b in the
tab displayed.
2
Press the [Microscope] button c of [Calibration]. The [Microscope
setting] wizard is displayed.
When settings are changed, the control box D2-CB
restarts automatically. It takes several minutes because
the control box restarts twice. Do not turn OFF the
main switch or unplug the AC adapter until the restart
completes.
When setting the language, disconnect the recording
media connected to the control box D2-CB such as a
USB memory, etc. until the restart (automatic) after settings
is completed.
Advertisement
Table of Contents
