Table of Contents
Advertisement
a
b
26
4
Acquiring still images
1
Select the [Controller] tab a .
2
Operate the microscope to frame the position you want to acquire
and bring it into focus.
TIP
Performing "Zoom the live image (P.38)" or "Display the focus
indicator (P.43)" allows you to bring images into focus easily.
3
Press the [Snap] button b to acquire and save images. The
images are saved in the recording media attached to the control
box D2-CB such as a USB memory, etc .
} The still images can also be acquired by operating ("double-
clicking") the mouse. When the keyboard is connected, the image
can also be acquired by pressing the [F8] key.
} The folder names and file names of acquired images are created
automatically. For details, refer to "Folder names and file names (P.48)"
TIP
The save destination of images can be changed (P.46). If the save
destination is specified in advance, images can be saved in PC
on the network during acquisition.
} The number of remaining images is displayed on the [Info] tab.
} The acquired image is displayed for approx. 1 second after the still
image is acquired.
· After the still image is acquired, the image data is recorded
CAUTION
in the recording media such as a USB memory, etc. Do not
disconnect the recording media while recording.
· As the data volume differs depending on acquisition
objects, you may be able to acquire more images than the
number of remaining images. Also, the number of counts
may not be decreased after acquisition or the number of
remaining images may not be increased even though one
frame is deleted.
· The number of remaining images differs depending on the
recording media.
· The recording media have life time. Depending on the
recording media status, the remaining capacity may be
reduced.
Advertisement
Table of Contents
