Table of Contents
Advertisement
c
d
e
50
a
b
10
Reset
While using the system, if you are not sure what settings you have
made, you can reset to the factory default settings if necessary.
1
Select the [Menu] tab a and select the [Maintenance] tab b in the
tab displayed.
2
Operate with the [Reset] c buttons.
Button
Only settings related to acquisition are returned to
the factory default settings.
The camera control software is returned to the factory
default settings.
The software of DP2-SAL and DP22/DP27-CU are
updated.
The version information of DP2-SAL and DP22/DP27-
CU is confirmed.
Do not turn OFF the main switch or unplug the AC adapter
CAUTION
until the restart completes.
Reset settings related to acquisition.
Reset items and setting values after reset are shown in the table below.
Returning the system to factory default settings.
Be careful, all settings including scale (including objective
CAUTION
magnification settings), language, display resolution are
returned to factory default settings.
If you press the button, the message shown on the left appears. Confirm
the content and press the [OK] button d .
When the system is reset, the control box D2-CB restarts
CAUTION
automatically. It takes several minutes because the control
box restarts twice. Do not turn OFF the main switch or
unplug the AC adapter until the restart completes.
If the recording media such as a USB memory, etc. are connected
to the control box D2-CB, the message shown on the left appears.
Disconnect the recording media and press the [OK] button e .
When resetting, disconnect the recording media
CAUTION
connected to the control box D2-CB such as a USB
memory, etc. until the restart (automatic) after resetting is
completed.
Reset items and setting values after reset are shown in the table below.
Function
Advertisement
Table of Contents
