Table of Contents
Advertisement
b
b
32
4
a
c
CAUTION
5
a
c
Setting ISO sensitivity
The ISO sensitivity can be set. The sensitivity is set based on the
sensitivity of the photographic film. There are following types of
sensitivity. The large the value is, the more it is suitable for acquiring
dark specimens or fast-moving objects.
ISO sensitivity 200, 400, 800
The larger the ISO value is, the more it is suitable
for acquiring dark specimens, but more noises are
noticeable. Select the appropriate ISO sensitivity
according to the situation.
1
Select the [Menu] tab a and select the [Quality] tab b in the tab
displayed.
2
Press the [ISO sensitivity] c button to select.
Setting white balance (WB) mode
1
Select the [Menu] tab a and select the [Camera Control] tab b in
the tab displayed.
2
Press following buttons of [White balance] c to change the white
balance mode.
Button
Auto
The white areas in the live image are identified
and the white balance is adjusted automatically.
If the brightness of the illumination light is
changed, the white balance is adjusted
automatically. However, if there are only few
white areas in the live image, the white balance
is not applied appropriately depending on types
or the brightness of specimens. Therefore, the
appropriate tint may not be obtained.
ROI
The white balance is adjusted so that the selected
areas become white.
Manual
R Gain and B Gain are set individually and the
white balance is adjusted according to your
preference.
DP22
DP27
100, 200, 400
Function
Advertisement
Table of Contents
