Table of Contents
Advertisement
a
c
11
Display Off setting
b
When DP2-SAL is not used for some time continuously, you can set
the view on the display disappear temporarily. If you move the mouse
when there is no view on the display, the view appears on the display
again. (If the touch panel display is connected, the view appears again
by tapping on the display.)
1
Select the [Menu] tab a and select the [Setting] tab b in the tab
displayed.
2
Press the
operation time in the list.
} It may take some time to change the settings.
button of [Display Off setting] c to select the non-
DP2-SAL
53
Advertisement
Table of Contents
