Table of Contents
Advertisement
a
84
6
Setting network
DP2-SAL can access to PC on the network by connecting control box
D2-CB to LAN.
The settings changed by this operation won't be returned
CAUTION
to factory default settings. The malfunctions or damages
caused by changing the settings are subject to the paid
repair.
} The network must be set by the network administrator.
} The keyboard and the mouse must be connected for setting the
network.
Following operations are available by setting the network.
· The acquired images can be saved directly to PC on the network.
· The acquired images saved to PC on the network can be played
by DP2-SAL. (The images you can play are only those acquired
with DP22/DP27 However, if DP22 is connected, the 2448 x 1920
image (acquirable with DP27) cannot be played. Also, you may
not be able to play images acquired with DP22/DP27 if they are
edited by the PC, etc.)
1
Connect the LAN cable to the control box D2-CB. For procedures to
connect LAN cables, refer to "LAN Connection (P. 21)".
} If the LAN cable is not connected, settings of the network are not
reflected to the control box DP2-CB.
2
While the camera control software is running and also the live
image or the acquired image is displayed, press [Ctrl]+[Alt]+[Insert] of
the keyboard.
3
The message shown on the left appears. Confirm the content and
press the [OK] button a .
When settings are changed, the control box D2-CB
CAUTION
restarts automatically. It takes several minutes until the
restart completes. Do not turn OFF the main switch or
unplug the AC adapter until the restart completes.
The control box D2-CB restarts and the Windows
desktop is displayed.
®
Advertisement
Table of Contents
