a
b
a
b
c
7
Selecting Zoom magnification / Magnification Changer
1
Select the [Controller] tab a .
2
If the setting items of Submenu are not displayed, press [Submenu]
b to open them.
3
Press the
magnification / magnification changer currently in the light path.
} The contents in the selection list can be set according to the
microscope in use. For setting procedures, refer to "Setting the
microscope (P. 78)".
c
8
Selecting Mirror unit
1
Select the [Controller] tab a .
2
If the setting items of Submenu are not displayed, press [Submenu]
b to open them.
3
Press the
in the light path from the list. (If the applicable coded illuminator is
combined, the mirror unit is set automatically according to the selected
mirror unit.)
} The contents in the selection list can be set according to the
microscope in use. For setting procedures, refer to "Setting the
microscope (P. 78)".
button of [Zoom/Mag. Changer] c to select the zoom
button of [Mirror units] c to select the mirror unit currently
DP2-SAL
39