a
b
76
4
Setting display target of scales and cross lines
When the display of scales or cross lines is set to ON, you can select
from 2 types described below.
Button
Live
Live/Snap
} These settings are also used for displaying measurements.
1
Select the [Play] tab a .
2
Press the [Measure] button b . The window changes to the
[Measurement] window.
c
3
Select the [Display on] button c .
Function
Scales and cross lines are displayed only on the
live image. (Scales or cross lines are not drawn on
the acquired image.)
Scales and cross lines are displayed on the live
image and also on the still image.