Table of Contents
Advertisement
b
b
34
8
a
c
9
a
c
Setting image color
You may be able to improve the color reproducibility of the live image
and the acquired image by changing the image color according to
the observation method.
Button
The color of the specimen is reproduced faithfully.
High fidelity
Use this color mode if no problem.
This is a color mode with less chroma comparing
Normal
to the high color reproduction mode. Select this
level if you want to acquire the clear color image.
This is a color mode with less chroma. If you use
this mode for the cell culture observation, phase
Cell culture
contrast observation or differential interference
observation, you can acquire even more natural
images.
This is an achromatic color mode. Select this
Grayscale
mode if you want to acquire the monochrome
image.
1
Select the [Menu] tab a and select the [Quality] tab b in the tab
displayed.
2
Press the [Image color] c button to select.
Setting sharpness
The sharpness is specified. The sharpness is a function to adjust the
degree of emphasizing the outline of the image.
1
Select the [Menu] tab a and select the [Quality] tab b in the tab
displayed.
2
Press following buttons of [Sharpness] c to change the emphasizing
level of the outline. The emphasizing level of the outline is weaker in
the order from Strong, Normal and OFF. Select the appropriate level
depending on the situations.
Button
Strong
The image is displayed with a clear outline.
Suitable for observing print boards, etc.
Normal
The image is displayed with a natural outline.
OFF
The sharpness process is OFF. Use this mode
when image noises are noticeable.
Function
Function
Advertisement
Table of Contents
