Polaris RANGER XP 900 2013 Manual page 326

Hide thumbs Also See for RANGER XP 900 2013:

Table of Contents

10. Disconnect the transmission shift cable (L) by

removing the clip (M) and sliding the washer and

shift cable off the bellcrank.

11. Mark the location of the upper shift cable jam nut (N).

Loosen the lower jam nut (P) and remove the shift

cable assembly from the bracket (Q).

12. Relieve pressure from the fuel rail. Disconnect the

fuel line at the fuel rail wrap the ends with a clean rag

to assure no dirt gets in the fuel system.

9924880 Rev 2- 1/10/2014 - 2013 / 2014 RANGER XP 900 - 2014 RANGER XP 900 / CREW 900 Service Manual

13. Using a 13mm socket and wrench, remove the

fastener (R) securing the bottom of the intake

plenum to the rear transmission mount.

14. Using a long screwdriver, loosen both hose clamps

(S) that retain the intake plenum runners to the

cylinder head intake adapters. Remove the intake

plenum and electronic throttle control as an

TRANSMISSION

Chapters

Table of Contents