Polaris RANGER XP 900 2013 Manual page 312

INSTALLATION
1. Place the bearing carrier (A) over the drive shaft.
2. Align the bottom of the bearing carrier with the lower
A-arm. Install the lower bearing carrier fastener (B).
3. Align the top of the bearing carrier with the upper A-
arm. Install the upper bearing carrier fastener (C).
NOTE
The lower shock bolt may need to be removed to allow
the upper A-arm to move freely.
4. Torque the upper and lower bearing carrier fasteners
to specification.
TORQUE
Bearing Carrier Fasteners:40 ft-lbs (54 Nm)
5. Install the wheel hub assembly onto the drive shaft.
9924880 Rev 2- 1/10/2014 - 2013 / 2014 RANGER XP 900 - 2014 RANGER XP 900 / CREW 900 Service Manual
© Copyright Polaris Sales Inc.
6. Install the washers (D) with domed side out and the
wheel hub castle nut (E). Torque the wheel hub
castle nut to specification and install a NEW cotter
pin (F).
TORQUE
Rear Wheel Hub Castle Nut:110 ft-lbs (149 Nm)
7. Install the rear brake caliper and torque the mounting
bolts to specification.
TORQUE
Rear Caliper Mounting Bolts:48 ft-lbs (65 Nm)
8. Install the wheel, washers and wheel nuts. Torque
wheel nuts to specification.
TORQUE
Wheel Nuts:Steel Wheels: 60 ft-lbs (81 Nm)
Aluminum Wheels: 120 ft-lbs (163 Nm)
FINAL DRIVE
7
7.25