Cps Replacement - Polaris RANGER XP 900 2013 Manual

CPS REPLACEMENT

1. Lift the rear cargo box to raised position.
2. Disconnect the CPS harness connector (A).
3. Remove CPS wire lead from wire clip (B).
4. Remove CPS retaining bolt and remove the sensor
from the stator cover.
5. Install new sensor using a light coating of oil on the
O-ring to aid installation.
6. Torque CPS retaining bolt to specification.
TORQUE
CPS Retaining Bolt:106 in-lbs (12 Nm)
7. Route CPS wire lead through wire clip and reconnect
CPS harness connector.
9924880 Rev 2- 1/10/2014 - 2013 / 2014 RANGER XP 900 - 2014 RANGER XP 900 / CREW 900 Service Manual
© Copyright Polaris Sales Inc.
FUEL SYSTEM - GENERAL
4.25
4