Polaris RANGER XP 900 2013 Manual page 167

FUEL SYSTEM - GENERAL
5. While holding a shop towel over the fuel line
connector, disconnect the fuel supply line (A) from
the pump (see "Fuel Line Removal / Installation").
CAUTION
It is possible for pressurized fuel to be present when
disconnecting the fuel line.It is recommended to allow
the vehicle to sit for a period of one hour after shutting
off the engine before servicing the fuel pump. This
allows the exhaust to cool and fuel pressure to drop.
A small amount of fuel may come out of the fuel lines or
pump fitting. Properly drain fuel into a suitable
container.
6. Disconnect the fuel pump electrical harness (B).
4.18
NOTE
9924880 Rev 2- 1/10/2014 - 2013 / 2014 RANGER XP 900 - 2014 RANGER XP 900 / CREW 900 Service Manual
7. Place the Fuel Pump Service Tool (PU-50326) over
the fuel pump PFA nut. Using a 1/2" drive ratchet or
breaker bar, loosen and remove the PFA nut.
Discard the PFA nut.
Apply downward force on the fuel pump flange while
removing the fuel pump PFA nut.
8. Remove the (4) T-40 Torx head screws securing the
ECU storage bin and slide the bin towards the
passenger side for clearance.
NOTE
© Copyright Polaris Sales Inc.