Dash Panels / Glove Box Removal; Rocker Panels - Polaris RANGER XP 900 2013 Manual

Hide thumbs Also See for RANGER XP 900 2013:
Table of Contents

Advertisement

DASH PANELS / GLOVE BOX REMOVAL

Upper Dash Panel
1. Remove the (4) push rivets (K) from the upper dash
panel (L) and pull the panel towards the seats to
release the front tabs.
Lower Dash Panel
2. Disconnect
the
ignition,
switches, instrument cluster, and both 12V power
points on the control dash panel.
3. Pop the shifter cap off and remove the T-25 Torx-
head screw and pull up on the shifter grip to remove
it.
4. Remove the (2) T-25 Torx-head screws (M) retaining
the bottom of the control dash panel and remove the
panel.
9924880 Rev 2- 1/10/2014 - 2013 / 2014 RANGER XP 900 - 2014 RANGER XP 900 / CREW 900 Service Manual
© Copyright Polaris Sales Inc.
5. Open the glove box and remove the (4) T-25 Torx-
6. Remove the (10) T-40 Torx-head screws retaining
headlight
and
AWD
7. Remove the (5) push rivets; one from each side of
8. Tilt the steering wheel to its lowest position and put
9. Carefully pull the lower dash panel towards the seat
10. Remove the (4) T-25 Torx-head screws along the
11. Carefully remove the dash storage panel.

ROCKER PANELS

1. Remove the seat bottom and under seat storage
BODY / STEERING / SUSPENSION
head screws (N).
the bottom of the lower dash.
the lower dash, two that were hidden behind the
control dash panel and one to the right of the
instrument cluster.
the gear selector in Low or High gear to ease
removal.
and up to remove it.
Dash Storage Panel
bottom of the dash storage panel and the (1) T-40
Torx-head screw inside the glove box in the back.
box.
5
5.25

Advertisement

Table of Contents
loading

Table of Contents