Polaris RANGER XP 900 2013 Manual page 89

ENGINE
10. Install the (2) longer bolts into left side mounting
holes. Torque left side mounting bolts to specification
using the numbered sequence shown.
11. Torque right side mounting bolts to specification
using the numbered sequence shown.
TORQUE
Engine / Transmission Mounting Bolts:Step 1-2: 64 ft-
lbs (87 Nm)Step 3: 5 ft-lbs (7 Nm)Step 4-7: 44 ft-lbs
(60 Nm)
12. Remove the clutch center distance tool.
3.32
9924880 Rev 2- 1/10/2014 - 2013 / 2014 RANGER XP 900 - 2014 RANGER XP 900 / CREW 900 Service Manual
13. Torque the (4) front engine mount fasteners (A) to
specification.
TORQUE
Front Engine Mount Fasteners:40 ft-lbs (54 Nm)
14. Remove the lifting straps and overhead or portable
engine hoist.
15. Install the breather hose onto the crankcase at the
front of the engine.
16. Install the (2) coolant hoses onto the engine.
17. Install (+) positive cable to the starter motor and (-)
negative cable to the starter motor mounting bolt.
18. Install the intake plenum and throttle body assembly.
Place the intake plenum runners into the cylinder
head intake adapters.
Be sure the intake plenum runners are fully seated in
the intake adapters before tightening the hose clamps.
NOTE
© Copyright Polaris Sales Inc.