Installation
1. Install the rear section of the propshaft onto the
transmission output shaft.
2. Install and torque the (2) flex bearing mounting
fasteners to 40 ft lbs (54 Nm).
3. Install rear floor (see Rear Floor - CREW in Chapter
5).
4. Install rear skid plate.
5. Install front skid plate.
6. Install front section of the propshaft.
7. Install the front gearcase (see "Front Gearcase
Removal").
9924880 Rev 2- 1/10/2014 - 2013 / 2014 RANGER XP 900 - 2014 RANGER XP 900 / CREW 900 Service Manual
© Copyright Polaris Sales Inc.
FINAL DRIVE
7
7.9