Front Gearcase Lubrication - Polaris RANGER XP 900 2013 Manual

10. Add the recommended amount of lubricant through
the fill plug hole. Maintain the lubricant level at the
bottom of the fill plug hole when filling the
transmission. Do not overfill.
FLUID CAPACITY
Recommended Transmission Lubricant:AGL
Gearcase Lubricant(PN 2878068) (Quart)
Capacity: 41 oz. (1200 ml)
11. Reinstall fill plug with a new O-ring and torque to
specification.
TORQUE
Fill / Drain Plug:10-14 ft-lbs (14-19 Nm)
12. Check for leaks. Dispose of used lubricant properly.

FRONT GEARCASE LUBRICATION

NOTE
It is important to follow the front gearcase maintenance
intervals described in the Periodic Maintenance Chart.
The front gearcase fluid level should be checked and
changed in accordance with the maintenance schedule.
• Be sure vehicle is positioned on a level surface when
checking or changing the fluid.
• Check vent hose to be sure it is routed properly and
unobstructed.
Front Gearcase Fluid Level Check
The fill plug is located on the bottom right side of the front
gearcase. Access the fill plug through the right front
wheel well. Maintain fluid level even with the bottom of
the fill plug hole.
1. Position vehicle on a level surface.
2. Locate the gearcase fill plug (A) through the right
front wheel well area.
9924880 Rev 2- 1/10/2014 - 2013 / 2014 RANGER XP 900 - 2014 RANGER XP 900 / CREW 900 Service Manual
© Copyright Polaris Sales Inc.
3. Remove the fill plug and check the fluid level.
4. If fluid level is not even with the bottom threads, add
the recommended fluid as needed. Do not overfill.
5. Reinstall the fill plug and torque to specification.
TORQUE
Fill / Drain Plug:8-10 ft-lbs (11-14 Nm)
Front Gearcase Fluid Change:
The drain plug is located on the bottom of the front
gearcase. Access the drain plug through the access
hole in the frame underneath the front gearcase.
6. Remove the fill plug (refer to "Front Gearcase Fluid
Level Check").
7. Place a drain pan under the front gearcase drain
plug.
MAINTENANCE
2
2.25