Polaris RANGER XP 900 2013 Manual page 171

Hide thumbs Also See for RANGER XP 900 2013:

Table of Contents

FUEL SYSTEM - GENERAL

4. With the ignition turned off, disconnect the wire

harness from the ECU. Lift the connector locking

lever and rotate it up until the connector is free from

Upon removing the ECU connector, you should hear a

"click" when the connector is fully open.

5. Remove the ECU from the vehicle.

6. To reinstall, reverse this procedure and tighten the

mounting screws to specification.

Upon installing the ECU connector, you should hear a

"click" when the connector is fully closed.

ECU Retaining Screws:24 in-lbs (2.7 Nm)

9924880 Rev 2- 1/10/2014 - 2013 / 2014 RANGER XP 900 - 2014 RANGER XP 900 / CREW 900 Service Manual

Chapters

Table of Contents