Connecting Rod Bearing Selection; Crankshaft Main Bearing Selection - Polaris RANGER XP 900 2013 Manual

ENGINE

CONNECTING ROD BEARING SELECTION

In order to select the proper bearing for the connecting
rods, you must reference the number on each connecting
u i
rod & and match that up with the rod journal letters
o
on the crankshaft .
In this example, you would use the number 2 as the
connecting rod code. You would use letters G and G as
the crankshaft codes (crank journals 2 and 4).
Based off the bearing selection chart, you would use:
Green bearing for each connecting rod
Bearing Selection Chart – Rod Bearings
Code B
1 Blue
Rod
2 Blue
3 Green
3.64
CRANKSHAFT
G
Blue Green
Green Yellow
Yellow Yellow
9924880 Rev 2- 1/10/2014 - 2013 / 2014 RANGER XP 900 - 2014 RANGER XP 900 / CREW 900 Service Manual

CRANKSHAFT MAIN BEARING SELECTION

In order to select the proper main bearings for the
crankshaft, you must reference the six numbers on the
q
crankcase
letters on the crankshaft
In this example, you would use the number 2 as the
crankcase codes (case journals 1, 2, 3, 4). You would
use letters G, Y, G, Y as the crankshaft codes (crank
journals 1, 3, 5 and 6).
Based off the bearing selection chart, you would use:
Green bearing for Main #1
Yellow bearing for Main #2
Y
Green bearing for Main #3
Yellow bearing for Main #4
and match that up with the main journal
w
.
© Copyright Polaris Sales Inc.