Connect to the Steering Wheel Encoder
Steering Column Shroud Removed
FIGURE 3.
Remove the shroud surrounding the steering column.
1.
Encoder Connections
FIGURE 4.
Locate and disconnect the machine's two encoder connections.
2.
Route the STEERING WHEEL ENCODER connector from the node harness (P/N 115-4001-087) into one
3.
of the machine's mating encoder connectors.
Note:
The machine's remaining encoder connector will not be used in the SmarTrax system.
Manual No. 016-5034-013 Rev. B
Cab Component Installation
9