Electrical Components And Cabling; Mount And Connect The Rate Control Module - Sprayer (Rcm - Sprayer) Ecu - Raven Sidekick Pro Quick Installation Reference

CHAPTER 3

ELECTRICAL COMPONENTS AND CABLING

NOTE: Review Figure 19 on page 21 and Figure 20 on page 22 for additional cabling and connection
information.

MOUNT AND CONNECT THE RATE CONTROL MODULE - SPRAYER (RCM - SPRAYER) ECU

BEST MOUNTING PRACTICES
Ensure the installer follows all of the following guidelines for best mounting practices:
• Use the ECU mounting bracket (P/N 107-0172-484) and supplied hardware.
• By default, the orientation of the RCM - Sprayer is set to horizontal position with connectors pointing
downwards, ensuring that water or moisture will not enter the connectors.
• Mount the RCM - Sprayer to the implement chassis using the provided hardware. The best place to mount the
RCM - Sprayer is near the flow meter, pressure sensor, and the valves for the sections.
• Ensure RCM - Sprayer is secure. The RCM - Sprayer needs to be near the mixer to receive signals from the flow
meter and the pressure sensor. The best place for the mixer is near the beginning of the boom. See Figure 8 on
page 11 for an example.
FIGURE 15. Mounted RCM - Sprayer ECU
FIGURE 16. RCM - Sprayer ECU Cable Connections
16 RCM - Sprayer with Sidekick Pro™ ICD Ratio Rate Quick Installation Reference