Configure Gps In The Sc1/Tc1; Position Accuracy Setup - Raven SC1 Calibration & Operation Manual

CHAPTER 6

CONFIGURE GPS IN THE SC1/TC1

FIGURE 1. GPS Setup Screen

POSITION ACCURACY SETUP

FIGURE 2. Position Accuracy Setup Screen
• Status - Displays the absolute status of the GPS accuracy. Statuses that may be displayed in this area include:
◦
No Signal
◦
Error
◦
Converging
◦
Converged
• Current Accuracy - A value representing the reported horizontal accuracy of the current solution as detected
by the receiver.
• Accuracy Threshold - Set the maximum distance allowed for the Current Accuracy value. If the Current
Accuracy value is greater than the set Accuracy Threshold, a DTC entry will be recorded on the Diagnostic
Trouble Code screen.
Select the Accept button in the lower, right corner of the screen to return to the GPS Setup tab.
52 Raven SC1™/TC1™ (software version 1.5) Calibration & Operation Manual for Towed Implements