Image Processor Performance; Input (Source Signal) Compatibility; Analog (Only) Input; Twin Hdmi Input - Christie Mirage M Series Setup Manual

6.3

Image Processor Performance

Min input pixel rate
Max input pixel rate
Max input resolution
Min input resolution
Max input frame rate with
Standard Image Processor
Card
Processing
Source switching time
6.4

Input (Source Signal) Compatibility

6.4.1 Analog (Only) Input

Connectors
Color spaces/signal types
A/D conversion

6.4.2 Twin HDMI Input

Connectors
Color spaces/signal types
Mirage M Series Setup Guide
020-100592-02 Rev. 1 (11-2010)
13 Mpix/s
330MHz
2048x1536 (QXGA)
640x400
59Hz at 2560x1600 (QXGA) *
10 bit throughout *
Seamless switching with switch
time less than 1 second
Over dual link DVI-D
* With sources that can output minimum
blanking, otherwise lower vertical rates
* Except Dual-DVI input in dual-link mode
(dual 8 bit input paths into 10 bit processing)
5 female BNC, 75 Ohm
R/Pr
G/Y
B/Pb
H/C
V
RGB
YPbPr
10 bits
2 independent HDMI inputs type A
2 loop-out connectors type A
RGB
YCbCr (4:2:2)
YCbCr (4:4:4)
HDCP support
HDMI 1.3 supported (not including audio) except:
12 bit color dithered to 10 bits; 16 bit color not
supported
Section 6: Specifications
6-7