Measuring Principle-Specific Accessories - Endress+Hauser PROFI BUS Proline Promag 53 PROFIBUS DP Operating Manual

Proline Promag 53 PROFIBUS DP/PA
Endress+Hauser
8.2

Measuring principle-specific accessories

Accessory Description
Mounting kit for Mounting kit for wall-mounted housing (remote version).
Promag 53 transmitter Suitable for:
• Wall mounting
• Pipe mounting
• Panel mounting
Mounting set for aluminum housings. Suitable for:
• Pipe mounting
Cable for remote version Coil and signal cables, various lengths. Reinforced cable
on request.
Ground cable for A set consists of two ground cables.
Promag W/P
Ground disk for Ground disk for potential matching
Promag W/P
Mounting kit for Promag H Mounting kit for Promag H, comprising:
– 2 process connections
– Screws
– Seals
Adapter connection for Adapter connections for installing Promag 53 H instead of
Promag A, H Promag 30/33 A or Promag 30/33 H DN 25.
Ground rings for Promag H If the process connections are made of PVC or PVDF,
ground rings are necessary to ensure that potential is
matched. A set comprises 2 ground rings.
Set of seals for Promag H For regular replacement of the seals of the Promag H
sensor.
Wall-mounting kit for Wall-mounting kit for the Promag H sensor.
Promag H
Welding jig for Promag H Weld nipples as process connection:
Welding jig for installation in pipes.
Accessories
Order code
DK5WM - *
DK5CA - * *
DK5GC - * * *
DK5GD * * *
DKH * * - * * * *
DK5HA - * * * * * *
DK5HR - * * * *
DK5HS - * * *
DK5HM - * *
DK5HW - * * *
133