Operating Options; Fieldcare; Operating Program; Tof Tool - Fieldtool Package - Endress+Hauser PROFI BUS Proline Promag 53 PROFIBUS DP Operating Manual

Proline Promag 53 PROFIBUS DP/PA
Endress+Hauser
5.5

Operating options

For the complete operation of the measuring device, including device-specific commands, DD
(device driver) files are available to the user for the following operating aids and programs:
5.5.1

FieldCare

FieldCare is Endress+Hauser's FDT-based plant asset management tool and allows the configuration
and diagnosis of intelligent field devices. By using status information, you also have a simple but
effective tool for monitoring devices.
5.5.2 Operating program "ToF Tool - Fieldtool Package"
Modular software package consisting of the "ToF Tool" service program for configuration and dia-
gnosis of ToF level measuring devices (time-of-flight measurement) and evolution of pressure
measuring devices as well as the "Fieldtool" service program for the configuration and diagnosis of
Proline flowmeters. The Proline flowmeters are accessed via a service interface or via the service
interface FXA 193.
Contents of the "ToF Tool - Fieldtool Package":
• Commissioning, maintenance analysis
• Configuring flowmeters
• Service functions
• Visualization of process data
• Troubleshooting
• Reading out the verification data and updating the software of the "Fieldcheck" flow simulator
5.5.3 Operating program "SIMATIC PDM" (Siemens)
SIMATIC PDM is a standardized, manufacturer-independent tool for the operation, configuration,
maintenance and diagnosis of intelligent field devices.
Operation
79