Softwarehistory - Endress+Hauser PROFI BUS Proline Promag 53 PROFIBUS DP Operating Manual

Troubleshooting
160
9.9

SoftwareHistory

Date Software version
10.2005 PROFIBUS DP
3.01.XX
03.2005 PROFIBUS PA
2.03.XX
10.2003 Amplifier:
1.06.XX
Communication module:
2.03.XX
12.2002 Communication module:
2.02.XX
09.2002 Amplifier:
1.04.XX
Communication module:
2.01.XX
03.2002 Amplifier:
1.03.XX
Communication module:
2.00.01
07.2001 Com. module: 1.01.00
06.2001 Amplifier: 1.02.00
Proline Promag 53 PROFIBUS DP/PA
Changes to software
Introduction of a new PROFIBUS DP I/O
module:
– Support of additional output signals (current,
frequency etc.)
Software expansion:
– Batching
Software expansion:
– New, improved functions
New functions:
– DEVICE SOFTWARE → Display of the device
software (NAMUR recommendation 53)
– US unit Kgal
Software expansion:
– Language groups
– New error messages
– SIL 2
– The totalizer values are also updated without
integration into the cyclic data transmission
– Support of compatibility with previous
PROFIBUS model Promag
33 with Profile Version 2.0
New functions:
– Operation hours counter
– Intensity of background illumination
adjustable
– Counter for access code
– Upload/download via ToF Tool - Fieldtool
Package
Compatible with service protocol:
– ToF-Tool FieldTool Package
(the latest SW version can be downloaded
under: www.tof-fieldtool.endress.com)
Software adjustment
Software expansion:
– Data length of advanced diagnosis adjusted in
the cyclic data transmission
!
Note!
As of this software version, a new device master
file
(GSD) must be used when replacing the device!
Software expansion:
– Communication software can be updated via
service protocol
Software adjustment
Software adjustment
Operating Manual
50099247/10.05
50099247/10.03
Endress+Hauser