Accessories; Measuring Principle-Specific Accessories; Communication-Specific Accessories; Service-Specific Accessories - Endress+Hauser CNGmass DCI Operating Instructions Manual

Accessories

60
9 Accessories
Various accessories, which can be ordered separately from Endress+Hauser, are available for the
transmitter and the sensor. Detailed information on the order code in question can be obtained from
your Endress+Hauser representative.
9.1

Measuring principle-specific accessories

Accessory Description
Mounting set for Mounting set for wall-mount housing (remote version).
transmitter Suitable for:
– Wall mounting
– Pipe mounting
– Installation in control panel
Mounting set for aluminum field housing:
Suitable for pipe mounting (¾" to 3")
9.2

Communication-specific accessories

Accessory Description
HART Communicator Handheld terminal for remote parameterization and for obtaining
Field Xpert handheld measured values via the current output HART (4 to 20 mA).
terminal
Contact your Endress +Hauser representative for more
information.
FXA195 The Commubox FXA195 connects intrinsically safe smart
transmitters with the HART protocol with the USB port of a
personal computer. This enables remote operation of the
transmitter with operating software (e.g. FieldCare). Power is
supplied to the Commubox via the USB port.
9.3

Service-specific accessories

Accessory Description
Applicator Software for selecting and configuring flowmeters.
Applicator can be downloaded from the Internet or ordered on
CD-ROM for installation on a local PC.
Contact your Endress +Hauser representative for more
information.
Fieldcheck Tester/simulator for testing flowmeters in the field.
When used in conjunction with the
"FieldCare" software package, test results can be imported into a
database, printed out and used for official certification.
Contact your Endress +Hauser representative for more
information.
CNGmass DCI
Order code
DK8WM - *
Order code
SFX100 - *******
FXA195 - *
Order code
DXA80 - *
50098801
Endress+Hauser