Weinmann MEDUMAT Standard2 Instructions For Use Manual page 34

3 Description
No. Designation
FlowCheck sensor connection line
1
with MEDUtrigger
2 FlowCheck sensor connection line
3 Inhalation adapter
4 Ventilation mask
5 Hygiene filter
6 etCO /O nasal cannula
2 2
7 Breathing circuit
8 Battery
9 Testing bag
10 Connection line of MEDUtrigger
11 MEDUtrigger
34 EN MEDUMAT Standard
Description
Connects MEDUtrigger and the FlowCheck sensor to
the device.
Connects the FlowCheck sensor to the device.
Facilitates inhalation.
Connects the breathing circuit to the patient.
Protects the device from viral and bacterial
contamination.
Allows oxygen inhalation via an external flow source
with simultaneous CO
(see 4.4.7, p. 62)
Administers the gas for inspiration to the patient via a
mask or endotracheal tube. There are three types of
breathing circuits:
• Reusable breathing circuit
• Disposable breathing circuit
• Disposable breathing circuit with reduced dead
space (see 3.5.4, p. 38)
Facilitates mobile power supply and can be replaced
if necessary.
Simulates a ventilated patient during a function check.
Connects MEDUtrigger to the device.
Is used to manually trigger mechanical breaths.
2
measurement via the device
2
(see 3.5.2, p. 35)
(see 3.5.2, p. 35)