Weinmann MEDUMAT Standard2 Instructions For Use Manual page 170

7 Description of the modes
170 EN MEDUMAT Standard
CO monitoring is used for the sidestream CO
2
during oxygen inhalation or bag mask ventilation
(see "4.7.8 Performing CO
option)", page 77). To use the CO
inhalation, you require an interface with a male Luer lock
connector for CO
2
etCO /O nasal cannula", page
2 2
during bag mask ventilation, connect the device's CO
tube to, for example, a breathing system filter or a bag-valve mask.
In CO monitoring mode, a CO
2
an etCO trend are displayed. In order to display the trend, the
2
mean value of the etCO
in a diagram, whereby the time axis of the trend can be set by the
user in the user menu
Capnography option)", page
The CO unit can be selected in the operator menu under the
2
menu item Device configuration
configuration", page
2
monitoring (only with Capnography
2
measurement during oxygen
2
measurement (see "4.4.7 Connecting the
62). To use the CO
curve (Capnography option) and
2
is determined every minute and displayed
2
(see "5.3.6 etCO
115).
(see "6.3.7 Device
129).
measurement
2
measurement
2
measuring
2
trend (only with
2