4.7.8 Performing CO
Capnography option)
Requirement
•
•
•
•
When using an etCO
may be distorted by the intake of additional air. Only the CO
trend can be assessed.
1. Assess CO
2. If necessary: Configure etCO
Result
The CO
monitored.
2
The device is switched on.
CO
monitoring was set as the ventilation mode for a new
2
patient
(see "4.7.3 Selecting a ventilation mode for a new
patient", page
69).
An etCO
/O
nasal cannula is connected
2
2
(see "4.4.7 Connecting the etCO
page 62)
or
The CO
measuring tube is connected to an external interface
2
(e.g., bag-valve mask with breathing system filter).
2
measurements diagnostically.
2
(only with Capnography option)", page
measurements and the respiratory rate of the patient are
2
4 Preparation and operation
monitoring (only with
/O
2
2
/O
nasal cannula, the CO
2
Trend
(see "5.3.6 etCO
2
MEDUMAT Standard
nasal cannula",
measurement
2
trend
2
115).
2
EN
2
77