Cylinder Clamp Straps; Hygienic Preparation - Weinmann ULM CASE II Instructions For Use Manual

4.5 Cylinder Clamp Straps

5 Hygienic preparation

To fit 0.8 l or 2.0 l oxygen cylinders in the base of
the case, use the accessory "WM 15141 – set of 2
clamp straps for oxygen cylinders" (20).
The cylinders are fitted in the oxygen cylinder recess
as shown. To secure a 2.0 l cylinder, use the outer
clamps. The centre and lefthand clamps are used
for an 0.8 l cylinder. Ensure that the straps are tight
to prevent the cylinder from slipping during trans-
port.
Clean the inside and outside of the case simply by
wiping with disinfectant. Recommended disinfec-
tant:
®
• terralin protect. See also the instructions for
use for the disinfectant used. It is recommended
that suitable gloves (e.g. household or disposa-
ble gloves) are used for disinfecting.
Remove the dividers first.
If the ULM CASE II is fitted with oxygen cylinder,
use a clean, dry cloth or a cloth dampened with
clean water to clean the outside of the fittings.
Hygienic preparation EN 9