Weinmann MEDUMAT Standard2 Instructions For Use Manual page 105

3. Send a pairing request to the device via the external data
4. If necessary: Enter the device's Bluetooth
Information on the Bluetooth
Operator menu | Device information
information", page
Result The device is paired with an external data documentation system
via Bluetooth
4.17.2 Pairing during ventilation
Requirement •
•
•
1. Start ventilation
2. Activate Bluetooth
3. Enter the device's MAC address in the external data
4. Send a pairing request to the device via the external data
5. If necessary: Enter the device's Bluetooth
Information on the Bluetooth
menu | Device information
page
Result The device is paired with an external data documentation system
via Bluetooth
documentation system.
data documentation system.
123).
®
data transmission.
The external data documentation system supports the device's
communication protocol.
®
The Bluetooth data transmission option is enabled and
activated in the device's operator menu
options", page 99).
®
The Bluetooth connection setting is activated in the operator
menu under Device configuration.
(see "4.7 Ventilating the patient", page
(only with Bluetooth
documentation system.
documentation system.
data documentation system.
123).
®
data transmission.
4 Preparation and operation
®
pin can be found in the
(see "6.3.1 Device
®
in the user menu
®
data transmission option)", page
®
pin can be found in the Operator
(see "6.3.1 Device information",
MEDUMAT Standard
®
PIN in the external
(see "4.15 Unlocking
66).
(see "5.3.7 Bluetooth
116).
®
PIN in the external
2
EN 105
®