Error Display (Error Display); Error Display; Rom Management (Rom); Rom Display - Canon LASER CLASS 810 Service Manual

Group
TYPE
SOFT-CNT
HST
CARD
ERR
PWD
FILE SYSTEM
FORMAT
CA-KEY
ERDS-DAT
DEPT USER CLEAR
SYSTEM INFO
CLEAR
ALL

16.14 Error Display (ERROR DISPLAY)

16.14.1 Error Display

An error code is displayed when a service error has occurred. The E code is displayed in the upper step, and the detail code is displayed the bottom step.

16.15 ROM Management (ROM)

16.15.1 ROM display

The table below lists the items of ROM display mode that are supported.
Item
MAIN
MAIN2
ECONT
OPROM
Item
Initializes user data and service data to suit specified destination settings.
Not used
ACTIVITY Initializes the activity report
ACCOUNT Clears print histories.
JAM Clears the jam history.
ERR Clear the error (error code) history.
ALARM Clears the alarm history.
ENVIROMENT Initializes the enviroment log data.
Clears department management information held in the controller before the card
reader is demounted.
E355 Not used
E719 Not used
Clears the system administrator's password.
Not used
USB MEMORY Format the USB memory. (This mode is used when the USB memory error is damaged
and E744 occurs.)
LICENSE Not used
DRIVE
Initializes an installed CA certification.
The settings related to e-RDS are cleared to the factory settings.
Clears the system management password.
Turn off the departmenet ID management and the user management.
Clears user and service data (except for some scan parameters and print parameters),
and the counter setting/registration data in the system dump list, except for the print
count.
T-16-24
Explanation
Displays the version number of the ROM (SYSTEM) mounted on the image
processor PCB.
Displays the version of the ROM (BOOT) mounted on the image processor
PCB.
Displays the version number of the ROM mounted on the DC controller PCB.
Displays the version number of the ROM mounted on the SEND PCB.
Explanation
Chapter 16
0017-7818
0016-7858
16-39