Error Display - Canon iP4300 Simplified Service Manual

3. ERROR DISPLAY

Errors are indicated by the LED, and warnings are displayed on the monitor of the computer connected
to the printer.
3-1. Operator Call Errors (Alarm LED Blinking in Orange)
Alarm LED
blinking in Error [Error code]
orange
2 times No paper. (ASF) [1000]
No CD / DVD tray. [1001]
No paper in the cassette.
[1003]
No CD / DVD. [1002]
3 times Paper jam. [1300]
Paper jam in the rear guide.
[1303]
Paper jam in the under
guide. [1304]
Front door close error.
[1250]
4 times No ink. [1600]
Ink tank not installed. [1660] Install the applicable ink tank(s) properly,
5 times The print head is not
installed. [1401]
Print head temperature
sensor error. [1403]
Faulty EEPROM data of the
print head. [1405]
Print head hardware error.
[1682]
Solution
Set the paper in the ASF, and press the
Resume/Cancel button.
*1
Set the CD / DVD tray, and press the
Resume/Cancel button.
Set the paper in the cassette, and press
the Resume/Cancel button.
*1
Set a CD or DVD in the CD / DVD tray
(which is ejected at error occurrence),
and insert the CD / DVD tray in the proper
position. Then, press the Resume/Cancel
button.
Remove the jammed paper, and press
the Resume/Cancel button.
Open the paper output tray.
Replace the empty ink tank(s), or press
the Resume/Cancel button.
and confirm that the LED's of all the ink
tanks light red.
Install the print head properly.
6
Remarks
Error in paper feeding from the
ASF.
Error in the duplexing transport
unit.
Error in paper feeding from the
cassette.
The error is indicated if the paper
output tray is closed at start of a
print job, or while a print job is
being performed.
Pressing the Resume/Cancel
button will exit the error without ink
tank replacement, however, ink
may run out during printing.