ELECTRICAL
INSTRUMENT CLUSTER PINOUTS
FUNCTION
CAN High
CAN Low
Switched Power (Vdc)
Constant Power (Vdc)
Ground
High Beam Input
Fuel Level Sensor
11.10
INSTRUMENT CLUSTER REMOVAL
Do not allow alcohol or petroleum products to come in
1. Disconnect the wire harness connector from the
2. Push the instrument cluster out from the back side of
PIN
1
2
3
4
5
8
11
Do not remove the rubber mount from the dash panel.
Only remove the rubber mount if necessary. The bezel
NOTE
contact with the instrument cluster lens.
back side of the instrument cluster.
the dash while securely holding the dash and rubber
mount.
NOTE
is a snap-on assembly and is a serviceable part.
9926813 R04 - 2013-2016 RZR 570 Service Manual
© Copyright Polaris Industries Inc.