Polaris RZR 570 2013 Service Manual page 425

The rider information display is located in the instrument cluster. All segments will light up for 1 second at start-up.
If the instrument cluster fails to illuminate, a battery over-voltage may have occurred and the instrument cluster may
q
Vehicle Speed Display - Analog display of vehicle speed in MPH or km/h.
w
Information Display Area - Odometer / Trip Meter / Tachometer / Engine Temperature / Engine Hours /
Service Info / Clock - LCD display of the service hour interval, total vehicle miles or km., total engine hours, a trip
meter, engine RPM and engine temperature.
e
MPH / KM/H Display - MPH is displayed when the instrument cluster is in the Standard mode. KM/H is displayed
when the instrument cluster is in the Metric mode.
r
High Beam Indicator LED icon illuminates whenever the Headlamp switch is in the high beam position.
t
Fuel Level Indicator - LCD bar graph indicating current fuel level. All segments will flash when the last segment
is cleared indicating a low fuel warning.
y
Clock - Displays current time in either 12-hour or 24-hour formats.
u
Engine Temperature Indicator - LED icon illuminates when the ECM determines the engine is overheating. The
indicators will initially flash to indicate the engine is overheating. The indicators will stay lit and not flash if a severe
overheating condition exists.
i
Service Interval Indicator - Preset at the factory and adjustable by the user, a flashing wrench symbol alerts the
operator that the preset service interval has been reached and maintenance should be performed. The wrench icon
will flash for 10 seconds upon start-up once it reaches 0.
o
Check Engine MIL - Illuminated when the ECM has detected a Diagnostic Trouble Code in the engine
management system.
a
AWD Indicator - Illuminated when the AWD / TURF switch is in the AWD position.
s
TURF Indicator - Illuminated when the AWD / TURF switch is in the TURF position (INTL Models Only).
d
Neutral Gear Indicator - LED icon illuminates when gear selector is in the neutral (N) position.
f
Gear Position Indicator - Displays gear selector position.
• H = High
• L = Low
• N = Neutral
• R = Reverse
• P = Park
• – = Gear Signal Error (shifter stuck between gears)
g
Power Steering System MIL - LED icon illuminates when a fault has occurred with the power steering system.
This indicator illuminates when the key is turned to the ON position and goes off when the engine is started.
h
Turn Signal / Hazard Lamp Indicator - LED icon illuminates whenever the LH, RH or hazard lamps are activated
(INTL Models Only).
j
Helmet / Seat Belt Indicator - LED icon illuminates for several seconds when the key is turned to the ON
position. The lamp is a reminder to the operator to ensure all riders are wearing helmets and seat belts before
operating the vehicle.
9926813 R04 - 2013-2016 RZR 570 Service Manual
© Copyright Polaris Industries Inc.
NOTE
have shut off to protect the electronic speedometer.
ELECTRICAL
11
11.5