Pressure Cap Test; Radiator - Polaris RZR 570 2013 Service Manual

PRESSURE CAP TEST

1. Remove the hood from the front cab (see
"WARNING" under Cooling System Pressure Test,
page 3.18).
2. Remove pressure cap (A) and test using a pressure
cap tester (commercially available).
3. The pressure cap relief pressure is 13 psi. Replace
cap if it does not meet this specification.
9926813 R04 - 2013-2016 RZR 570 Service Manual
© Copyright Polaris Industries Inc.
ENGINE / COOLING SYSTEM

RADIATOR

1. Check radiator air passages (A) for restrictions or
damage.
2. Carefully straighten any bent radiator fins.
3. Remove any obstructions with compressed air or low
pressure water.
CAUTION
Washing the vehicle with a high-pressure washer could
damage the radiator fins and impair the radiators
effectiveness. Use of a high-pressure washer is not
recommended.
3
3.19