Polaris RZR 570 2013 Service Manual page 157

5. Rotate crankshaft so the flywheel key
upward.
6. Fully install starter gear onto the crankshaft as
shown.
7. Align the flywheel keyway with flywheel key on the
crankshaft.
8. By hand, lightly press the flywheel inward while
rotating the starter gear counter clock-wise. Fully
install the flywheel until seated on the crankshaft
taper.
9. Install the flywheel washer.
10. Hold flywheel with commercially available strap
wrench.
9926813 R04 - 2013-2016 RZR 570 Service Manual
© Copyright Polaris Industries Inc.
y
is facing 11. Torque new flywheel nut
12. Install starter idler gear
ENGINE / COOLING SYSTEM
u
to specification.
TORQUE
Flywheel Retaining Nut:
133 ft-lbs (180 Nm)
i o
and shaft .
3
3.85