The Treatment Procedure; Start Sequence; Main Menu; Choose Operating Mode - KaVo HealOzone 2130 C Instructions For Use Manual

Instructions for use HealOzone 2130 C
|
5 Operation

5.2 The treatment procedure

5.2 The treatment procedure
Note
The cycle can be stopped at any point by pressing the stop button or footswitch

5.2.1 Start sequence

When the unit is switched on, it first runs through a start sequence which takes
approximately five seconds. Once this is complete, the main menu appears auto‐
matically.
Screen information:
▪ Device name
▪ Software version and date
▪ Set drier servicing
– S = sensor monitoring
– C = counter monitoring

5.2.2 Main menu

The treatment time can be changed in incremental steps within the set thresholds
using the plus or minus button.
Increments:
Minimum:
Maximum:
To start treatment, press the Start button or the footswitch.
Screen information:
▪ Treatment time
▪ Ready to start

5.2.3 Choose operating mode

▶ In the main menu, press the Set button.
Operating mode toggles between Normal and Endo.

5.2.4 User menu

Press the SET key for a while (approx. 2 seconds) in the main menu to switch to
the user menu. You can select different language settings with the PLUS and MINUS
buttons.
Screen information:
▪ Current language
10 seconds
20 seconds
60 seconds
33/57