Setting The Lux Afterglow Time; Setting The Operating Mode Of The Foot Pedal; Setting The Pump Key Operating Mode Of The Foot Control - KaVo MASTERsurg LUX Wireless Instructions For Use Manual

5.2.4 Setting the LUX afterglow time

The LUX afterglow time determines how long the handpiece LEDs afterglow after
each motor stop. The afterglow time can be set from 0 to 10 seconds.
▶ Press the plus and minus keys to change the LUX afterglow.

5.2.5 Setting the operating mode of the foot pedal

The motor can be triggered in either of two operating modes:
The motor starts at full speed when the foot pedal is actuated.
The motor speed can be adjusted continuously up to the maximal level using the foot
pedal
▶ Touch the symbol to change the operating mode of the foot pedal.

5.2.6 Setting the pump key operating mode of the foot control

The pump can be triggered in either of two operating modes:
Actuating the pump key switches the coolant flow on or off.
Instructions for use MASTERsurg LUX Wireless REF 1.009.1200
33 / 76
5 Operation | 5.2 Device settings