Checking And Replacing The Coverglass Cartridge - Leica HistoCore SPECTRA CV Instructions For Use Manual

6
Daily Instrument Setup
1
Fig. 59

6.3.3 Checking and replacing the coverglass cartridge

Warning
While changing the coverglass cartridge, always wear personal protective clothing (cut-resistant
gloves, safety goggles)!
Note
• For the HistoCore SPECTRA CV Leica-validated coverglass
available. The coverglasses are only available in cartridges which are equipped with a RFID chip.
Information on the cartridge used (e.g. quantity and size) is automatically read when it is inserted
and the hood is closed.
• Changing the coverglass cartridge in the
procedures also apply for the coverslip line L1.
• For each newly inserted rack, the consumable management system (CMS) calculates whether the
available quantity of coverglass in the magazine is sufficient.
• If the CMS determines that a newly inserted rack can no longer be completely coverslipped, an
appropriate warning message
• If there is a rack located in the load drawer, or if one is to be placed there, the CMS indicates to the
user that a new coverglass cartridge must be inserted (→ Fig. 60-2).
82
2
5
L2 coverslip line is described in the following. The same
(→ Fig. 60-1) will be displayed to the user.
(→ P. 158 – Consumables)
Version 2.1, Revision K
3
4
are