Main Menu Overview - Leica HistoCore SPECTRA CV Instructions For Use Manual

Warning
For manual loading of the HistoCore SPECTRA CV in workstation mode, the user is responsible to pay
attention to racks being transferred from the HistoCore SPECTRA ST to the HistoCore SPECTRA CV
at the same time. The end times of the HistoCore SPECTRA ST have to be taken into account before
loading manually since otherwise there can be delays in the HistoCore SPECTRA ST that can affect the
staining result.
5.6

Main menu overview

The Main menu (→ Fig. 19-6)
below. This menu is visible in all submenus and allows switching to another submenu at any time.
The
process. Here, the respective handle of the rack is displayed in representational form with
the respective color.
This display shows the standard display.
The
respective coverslip line (mounting medium and coverglasses) and enables access to the
cleaning and priming options menu for the two coverslip lines.
The
Basic settings can be configured in the Settings
version, date and time and other parameters can be adapted to local requirements here.
The oven can be switched on or shut down.
In the
modifications to the parameter sets by unauthorized persons (Supervisor
However, the instrument can be used without a password in the standard
HistoCore SPECTRA CV
is located on the left side of the display, which is divided as described
Process Status Display
Module Status (→ Fig. 19-8) displays an overview of the consumables filled for the
Parameter sets (→ Fig. 19-9)
User Settings (→ Fig. 19-11)
(→ Fig. 19-7) displays the current status of all racks in
menu is used to create and manage parameter sets.
(→ Fig. 19-10)
menu, a custom password can be set up to prevent
5
Operation
menu. The language
Mode).
User Mode.
45