Elements Of The Status Display - Leica HistoCore SPECTRA CV Instructions For Use Manual

5.2

Elements of the status display

2
Fig. 20
1 Current date
2 If the remaining service life for the battery is about 3 months or less, this symbol appears on the
status bar instead of the date. A notification is sent to the user at the same time.
3 If the service life of the battery has expired, this symbol appears on the status bar instead of the
date. A notification that the battery needs to be replaced by a Leica service technician is sent to
the user at the same time.
4 If alarms and error messages are displayed during operation, this alarm symbol appears. Pressing
this symbol allows the last 20 active messages to be viewed again.
5 If warnings and notes are displayed during operation, this notification symbol appears. Pressing
this symbol allows the last 20 active messages to be viewed again.
6 Local time
7 The Process
unload drawer or a rack from the HistoCore SPECTRA ST is expected.
8 This symbol displays that the oven is active and is in the heating phase.
9 This symbol displays that the oven is active and is ready to operate.
10 This symbol displays that the oven has been deactivated.
11 The operation of the instrument in
provides additional operation and adjustment options for trained staff. Access to this mode is
password-protected.
12 This User symbol displays that the instrument is in user mode, which permits a simplified
instrument operation without password.
HistoCore SPECTRA CV
3
4 5
1
symbol indicates that processing is currently active and that a rack may still be in the
Supervisor Mode
8
6 7
is displayed by this symbol. This mode
Operation
9 10
11 12
5
41