Electrical Connection - Leica HistoCore SPECTRA CV Instructions For Use Manual

4.2

Electrical connection

Warning
• Use only the power cable provided, which is intended for the local power supply.
• Before connecting the instrument to the power supply, make sure that the
bottom front of the instrument
1. Connect the power cable to the power input socket on the rear panel of the instrument
(→ Fig. 4-1).
2. Plug the power plug into a grounded power socket.
3. Switch on the
4. After a short period of time, the
finished starting up, the switch lights up red (→ Fig. 5-1)
mode.
5. The Operating switch
HistoCore SPECTRA CV
(→ Fig. 1-8)
Main switch (→ Fig. 1-8).
Fig. 4
Operating switch
can then be operated.
Fig. 5
Installation and Instrument Setup
is in the OFF ("0") position.
lights up orange. Once the software has
and the instrument is in standby
1
Main switch on the
1
4
25