Hazard Warnings - Leica HistoCore SPECTRA CV Instructions For Use Manual

Coverslipper
Table of Contents

Advertisement

2
Safety
Warning
• The presence of malware on the system can lead to uncontrolled system behavior. Ensuring that the
behavior of the instrument conforms to specifications is no longer possible in this case! If the user
suspects malware is on the system, the local IT department must be notified immediately.
• You must make sure that any data loaded onto the instrument is free of viruses. No anti-virus
software is provided.
• The instrument is only suited for integration in a firewall-protected network. Leica shall not assume
any liability for errors due to integration in an unprotected network.
• ONLY technicians trained and permitted by Leica can connect a USB input device (mouse/keyboard,
etc.) for service and application diagnostics only.
In the interest of specimen safety, the HistoCore SPECTRA CV indicates when it is necessary
for the user to intervene using on-screen messages and audible signals. Therefore, the
HistoCore SPECTRA CV robotic coverslipper requires that the user is within hearing distance during
operation.
Warning
The product uses a class 1 laser source.
Attention, laser radiation! Do not look into the beam! This can cause injury to the retina of the eye.
Warning
2.2

Hazard warnings

The safety devices installed in this instrument by the manufacturer only constitute the basis for accident
prevention. Operating the instrument safely is, above all, the responsibility of the owner, as well as the
designated personnel who operate, service or repair the instrument.
To ensure trouble-free operation of the instrument, make sure to comply with the following notes and
warnings.
Please note that electrostatic discharges can result due to direct or indirect contact with the
HistoCore SPECTRA CV.
Warning
Markings on the instrument surface showing the warning triangle indicate that the correct operating
instructions (as defined in these Instructions for Use) must be followed when operating or replacing
the item marked. Failure to adhere to these instructions may lead to accidents causing personal injury
and/or damage to the instrument or accessories or destroyed, unusable specimens.
14
LASER RADIATION - DO NOT
STARE INTO BEAM
ISO 60825-1: 2014
P<1 mW, λ = 630 to 670 nm
Pulse duration = 500 µs
Class 1 laser product
Version 2.1, Revision K

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

14051454200

Table of Contents