Process Status Display - Leica HistoCore SPECTRA CV Instructions For Use Manual

5
Operation
5.3

Process status display

• In the Process status display
color of the respective rack handle.
• The status bar
with the number and color assigned to the rack handles. These symbols are also visible if the daily
Quick Prime (→ P. 121 – 7.3.1 Quick Prime)
Note
Each ongoing processing is illustrated by a rack handle symbol. It is shown in the same color as the
actual rack handle. Various information is displayed on the handle symbol (→ Fig. 21).
3
4
5
6
7
Fig. 21
1 Parameter sets that can be started
2 Racks in the process
3 Parameter set number
4 Current position of the rack in the instrument:
CV1/CV2 = coverslip line L1/L2, ROT = rotator, O01/O02 = oven position 1/2
42
(→ Fig. 19-2), all racks in the process
(→ Fig. 21-1) for the main window lists the parameter sets that can currently be started
has not yet been carried out.
2
5 Progress display of processing
6 Estimated remaining time (hh:mm)
7 Time at end of process
(→ Fig. 21-2) are displayed in
1
Version 2.1, Revision K