Starting The Coverslipping Operation In Workstation Mode - Leica HistoCore SPECTRA CV Instructions For Use Manual

6
Daily Instrument Setup

6.7.2 Starting the coverslipping operation in workstation mode

L The coverslipping operation also starts automatically just like after manually inserting a rack in
the load drawer.
1. Place the rack into the load drawer of the HistoCore SPECTRA ST.
2. Both the staining and coverslipping processes are controlled by the assigned rack handle color.
3. Racks where the staining and coverslipping processes have been completed are automatically
placed in the unload drawer of the HistoCore SPECTRA CV and have to be removed by the user
there.
L As soon as a rack is placed in the HistoCore SPECTRA ST that has to be transferred through the
transfer station
(→ Fig. 20-7)
The Process
in the unload drawer or a rack from the HistoCore SPECTRA ST is expected.
Note
In workstation mode it is also possible to place a rack for coverslipping directly in the load drawer of
the HistoCore SPECTRA CV.
104
to the HistoCore SPECTRA CV, the
of the HistoCore SPECTRA CV.
symbol indicates that processing is currently active and that a rack may still be
process icon is displayed on the status bar
Version 2.1, Revision K