User Settings - Leica HistoCore SPECTRA CV Instructions For Use Manual

5
Operation
5.7

User settings

To activate supervisor mode, proceed as follows:
1. Press the
Fig. 27
48
This menu can be used to configure the appropriate access level. A distinction is
made between the following:
• Standard user
• Supervisor (password-protected)
• Service technician (password-protected)
Standard user:
The standard user does not need a password and can use the completely configured
instrument for all routine applications. It is not possible for this user group to modify
programs and settings.
Supervisor:
The supervisor has the same access options as the standard user, but when the
instrument is in idle mode, they can also create, edit and delete parameter sets,
change settings and perform the instrument setup functions. Therefore, supervisor
access is password-protected.
Supervisor button (→ Fig. 27-1).
1 2
Version 2.1, Revision K